Wi-Fi Smart Dimmer Switch - WF500D

Connecting to the Wi-Fi Smart Dimmer Switch - How to put device in Pairing Mode? (Normal and AP Mode)
There are two configuration methods, Normal Mode and AP mode, explained below. First, please check to ensure your phone/tablet being used to connect sma...
Mon, Jun 17, 2019 at 2:50 PM
Can the Smart Dimmer be used in 3-way Switch? (two switches controlling the same light fixture)
  Currently, our WF500D Dimmer Switches are only compatible in a single pole configuration (one switch controlling one light fixture). We do, however, have...
Thu, Jun 27, 2019 at 4:54 PM
New Router or Updated WiFi Password - Getting Your Dimmer Switch Reconnected
When you update your network credentials or connect to a new router, you will need to reconnect your Smart Devices.  The easiest way to reconnect to a ...
Thu, Jun 27, 2019 at 1:03 PM
Which Wires are Required for Installation of the Smart Dimmer Switch? Can I install this device if I only have 2 wires or do not have a neutral wire?
All four wires (Hot, Neutral, Load and Ground) stated in the instruction manual are required for proper installation and for the Dimmer Switch to operate/fu...
Fri, Jun 14, 2019 at 2:56 PM
Smart Dimmer Light Bulb Issues: Flickering Bulbs, Buzzing or Dim Light when OFF
Flickering lights or buzzing is not normal. Please check to ensure the switch is wired correctly, installed with all four wires (Hot, Neutral, Load and Grou...
Fri, Jun 14, 2019 at 3:01 PM
How to Factory Reset the Smart Dimmer Switch
Please follow below instructions to reset you Smart Dimmer Switch to manufacturer settings. Once the LED indicator light on the Dimmer Switch begins flashin...
Thu, Jun 27, 2019 at 1:24 PM
Bulb(s) Connected to Smart Dimmer Remain Dimly Lit When OFF in the App
Please first check to ensure the switch is wired correctly, installed with all four wires (Hot, Neutral, Load and Ground) in a single pole configuration (on...
Wed, May 1, 2019 at 3:00 PM