Please check your phone/tablet settings to make sure that you are connected to your 2.4 GHz WiFi network. If you are not sure what your router’s output signal strength is, please contact your internet service provider.

Next, make sure your device is in close range to your WiFi router.

There are 3 LED indicators on the outlet. The left LED indicator should be flashing quickly when you are initiating connection.

Please follow the below steps to initiate left flashing LED light:

-After the outlet is properly installed with all wires, the center light will turn blue

-Press and hold the power button (in the middle of the outlet) for about 10 seconds, until the left LED light turns on and begins rapidly flashing (3x per second)

Once left LED indicator is rapidly flashing, please open the CE Smart App, click add device, click outlets/plugs, confirm LED is rapidly flashing, and then enter the password for your 2.4GHz network (case sensitive). Confirm to connect your device. While connecting, it is normal for the blue LED light to stop flashing.